Star Enterprises, Mumbai
Star Enterprises, Mumbai

Home » Products »

Insulation Material For Induction Furnace

Variety of material required for Insulation of Induction Coil.
We supply complete range of Insulation material required to reinsulate/repiar Induction coil of any make.
We keep all products under this category ex-stock. 

Insulation Material

Insulation Material
Approx. Rs 170 / Square Meter(s)

Insulation materials are mainly use to Insulate Induction coil. There are various kinds of material required for the purpose. The good quality of material is utmost important, as Induction coil operates at very high voltage and Temperature. Any negligence about coil insulation results in failure of costly components and production loss.

We cater very wide range of Insulation products of reputed Brands , which are as under.

  • Flexocoat Base & Hardner

  • Polyester Resins with Activator & Hardner

  • Fiber Glass Tape

  • F.G.Woven Tape

  • FRP Sheets

  • FRP Tubes, Washers , Spacers

  • FRP Supports (Flats)

  • FRP Angles & Channels

  • Silicon Rubber Tape

  • Silicon Bonded Mica Sheet

  • Champion Gasket sheet

  • Asbestose Mill Board

  • PTFE Sheet

  • Tuff seal

  • Permali Wood

  • Mica Washer , Tube & Sheets

  • Yoke Mica

  • Ring Mica

  • Glass Mica Tape

  • Varnish & Thinner (All Types)

  • Syndanio Sheet & Segments

  • Syndanio spacers (Gutka)

  • Nomex Paper

  • Asbestose Cloth & Rope

  • Bektol red

  • Beckalite-Hylum Sheets

  • Ceramic Paper / Cloth / Rope


Flexocoat Base

Flexocoat Base
Approx. Rs 500 / Kilogram(s)
It is a epoxy paint having excellent adhesion, very good electrical & Mechanical properties include thermak shock resistance coupled with long durability. Available in 1 kg pack ex stock. Applications: This coating is mainly used to insulate the coil of Induction Furnace, It has excellent adhesion on copper and stainless steel with desire flexibility to withstand cooling and heating cycles normally encountered during operation of furnaces and provides electrical resistance to voltage developed between coil turns to protect from sparking.

PTFE Sheets

PTFE Sheets
Approx. Rs 1,800 / Meter(s)
PTFE Sheets are available in various sizes & thickness. Temperature withstanding capacity upto 250 degree centigrade. PTFE skived sheets are available in thickness from 0. 1mm to 3. 5mm, width available 300mm, 450mm, 600mm, 1000 mm, 1200mm, 1500mm. PTFE moulded sheets are available in thickness from 1. 5mm to 100mm, width available 300mm, 400mm, 450mm, 500mm, 600mm, 900mm, 1000mm, 1200mm.

PTFE (polytetrafluoroethylene) the combination of chemical and physical properties of ptfe is a consequence of its true fluorocarbon structure. this unusual structure leads to a material which has an almost universal chemical inertness; complete insolubility in all known solvents below 300°c; excellent thermal stability; and unsurpassed electrical properties, including low dielectric loss, low dielectric constant and high dielectric strength. furthermore, ptfe does not embrittle at very high or at very low temperatures.

Other Information

  • Pay Mode Terms: T/T (Bank Transfer), Western Union, Other

Induction Coil Epoxy Paint

Induction Coil Epoxy Paint
Approx. Rs 150 / Kilogram(s)

Coil Paint is used for insulation of induction coil. The dielectric strength of flexocoat is 400 Volt/mil. The wide assortment of coil paint is manufactured with high grade of raw material which is procured from reliable vendors.

Some of the products offered by us are:


  • Flexocoat 2216 & 4515 Base & Hardner
  • Becktol Red
  • Elomoluft-1A varnish
  • Becktol Grey All type of Varnish & Thinner
  • Polyester Resins with activator & Hardener

Permali Wood

Permali Wood
Approx. Rs 500 / Piece(s)

Permali Wood Coil support are used for supporting Induction coil in up right position. It takes total load of top on it and protects coil from deformation. Various sizes of coil support offered by us is of premium quality and available at optimum prices.

Following are some of the components:


  • Permali wood
  • Tuffseal
  • Permali tee
  • FRP support
  • Backalite tee
  • Coil restraint Kit.

Mica Products

Mica Products

Mica are mainly used for thermal as well as electrical insulation purpose. We are offering an exclusive range of mica which is available as per the requirements of the clients and is offered at optimum prices. These are quality tested at several parameters to assure their standards.

The range comprises of following products:  

  • Sheets 
  • Yoke mica 
  • Ring mica 
  • Mica washers 
  • Mica tubes 
  • Silicon bonded mica sheet 
  • Mica powder.

Yoke Mica
Approx. Rs 150 / Kilogram(s)
Yoke Mica is made from Hard Mica sheet . It have very good dielectric and mechanical properties. We also supply it with lamination of Asbestos sheet along with Nomex paper. Also known as lamination mica pad.

It is manly used in Induction furnace to provide electrical Insulation between coil and yoke.

  • Max length-  2500 mm in single piece
  • Width upto   400 mm
  • Thickness-    5 to 25 mm

Syndanio Product

Syndanio Product

Syndanio provides high mechanical strength Along with high thermal resistance. They are mainly used to construct crucible body We are catering variety of  Syndanio product which stands high on quality parameters and is available at competitive prices.

The range comprises of following components such as:


  • Rings 
  • Sheets  & its segments 
  • Washers 
  • Coil Spacers 
  • Bushes and any size & shape

Round Mica
Approx. Rs 250 / Kilogram(s)
Round Mica or Ring Mica is made from Hard Mica sheet cut as per required radius and width, Normally one ring is made from several segments. It has very good Dielectric strength.


  • It is used for provide insulation between turns of Induction Furnace Coil.
  • Available in  different thickness from 3 mm to 12 mm

Syndanio Sheets

Syndanio Sheets
Approx. Rs 1,500 / sheet
This is a non arcing, compressed asbestos sheet. Available in a standard size of 42” x 48”. Thickness  available from 3. 5mm to 75mm the sheet is machinable so by machining we can produce syndanio spacers, syndanio washers, syndanio bushes syndanio rings, syndanio top-bottom of crucibles, this is used as electrical insulation purpose in industry.

FRP Washers

FRP Washers
Approx. Rs 10 / Piece(s)
Used for electrical insulation purpose. Thickness from 1mm to 5mm. Available in various sizes. Temperature withstanding capacity upto 400 degree centigrade.

Asbestos Rope

Asbestos Rope
Approx. Rs 150 / Kilogram(s)
Several ends of asbestos yarns are uniformly twisted to produce very flexible asbestos ropes.

For thermal insulation of pipelines, particularly when there is a danger of damage by abrasion In very confined spaces and additional protective cladding is not used. These asbestos rope are widely used in coke oven doors, between the fire bricks and steel frame-work in steel plants as well as in boiler houses. These asbestos ropes satisfy the need for a resilient yet tough material to accommodate differences in thermal expansion and effect an efficient seal against leakage of  gases.


  • Suitable For Temperature Upto 350`C
  • Asbestos Rope is available in Round / Square / Rectangular Section
  • Asbestos Rope is available in Size: 6mm to 50mm
  • Asbestos Rope is available in Packing: 1 Kg. / 2.5 Kgs. / 5 Kgs. / 7.5 Kgs. / 25 Kgs.

Asbestos Cloth

Asbestos Cloth
Approx. Rs 150 / Kilogram(s)
Asbestos Cloth Woven from Asbestos Yarns Possesses Excellent fire, rot and vermin proof qualities. Therefore it is used in a number of diversified applications in a variety of textures, thicknesses and weights to suit these applications.
Asbestos Cloth is a fabric to form pliable mineral textile with high tensile strength and high resistance to heat, flame, chemicals and weather. It is made from 100% pure longer spinning fibre of Asbestos.

Asbestos cloth is used in manufacturing of annealing and fire smoothing blankets, belts for conveying heated objects through oven and in dryers such as blue print machines, covers for rollers on laundry flat-work ironers, for laminating cloth in plastic parts covering heat insulation, curtains for dryers, welding booths, shields to protect workmen from fire, all types of safety clothing, filter cloths, forge furnace hood mills scale fenders, wrapping for sheet glass and conveyor rollers and many more other products.

Asbestos Cloth is for manufacture of fire-resistant gloves, suits and other clothing for fire fighting. It is also used for heat-resistant gloves, aprons etc. For use in glass works foundries, chemical works, welding shops, plastic moulding shops, etc. Asbestos Cloth is using as safety curtains in theatres, ships and aircraft and wherever a fire barrier is required. We are supplying Asbestos Cloth for the manufacture of fire blankets for use in ships, schools, institutions, cinema rooms, kitchens, garages, etc. and wherever there may be a need for clean and effective means of smothering during small outbreaks of fire.

  • Available Size: 1.5mm, 2mm, 3mm, 5mm & 6mm ,  Width: 1mtr
  • Suitable for temperature upto 400 c

Asbestos Products

Asbestos Products

Asbestos has excellent thermal resistance property. The main application is protective thermal cover. Asbestos products are mainly used for covering rubber hose pipe, in furnace lining etc. We are offering a comprehensive range of Asbestos products which is available at optimum prices.

 Some of the components are mentioned below: 


  • Cloth 
  • Ropes 
  • Patta (Belt) 
  • Sheets (Mill Boards)

Approx. Rs 150 / Piece(s)
PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Moulded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form. Molded PTFE rod has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly rods. Molded PTFE rod has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics. PTFE Molded Rods can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion.


  • Extruded Rod Min. Diameter= 3mm, Max. Diameter= 300 mm,
  • Length= normal 100 MM TO 1000 MM
  • Molded Rod Min. Diameter= 5mm, Max. Diameter=300mm,
  • Length: Max. 300mm

Fiber Glass Products

Fiber Glass Products

Fiber glassproducts are the prime insulating material used in any induction furnace. There are variety of products made from fiber glass

Some of them which we cater are—


  • FRP Tubes
  • F.G. Tapes 
  • F.G.Woven Tape 
  • FRP Sheet 
  • FRP flats for coil support 
  • FRP Washers  
  • FRP Spacers 
  • DMC Spacers 
  • Glass Mica tape 
  • Glass/Ceramic Wool.

FRP Sheet
Approx. Rs 200 / Kilogram(s)
Frp sheet thickneck from 0. 5mm to 50mm, maximum size  10 feet x 5 feet temperature withstanding capacity upto 400 degree centigrade to be used as electrical insulation in industry.

FRP Tubes
Approx. Rs 150 / Meter(s)
Standard length 1 mtr. Available in various diameters  & thickness. Used as electrical insulation in various industries. Temperature withstanding capacity upto 400 degree centigrade.

Mica Washer

Mica Washer
Approx. Rs 10 / Piece(s)
Description: Mica Washers are used for thermal & electrical insulation. This product have low thermal expansion, low thermal conductivity & withstand very high dielectric strength & high temperature and also have good mechanical strength before and after machining.
  • Type:  Silicon bonded and regular MICA
  • Capacity: Withstand temperature up to 950° C, BDV > 20 KV/ mm.
  • Available:  In any thickness & different diameter
  • Application: Wherever insulation of high temperature & high dielectric strength is required.

Mica Tube
Approx. Rs 150 / Meter(s)
Description: Mica tube are hard tubes  with good mechanical strength  and is used for Thermal & electrical insulation.

  • Type: Normal  Mica Tube  (150°C)
  • Silicon bonded mica tube- class F (600°C)
  • Available: In ID of 10mm, OD of 100 mm
  • Standard length: standard  length is 1000mm, bigger length upto 1300 mm is available on request.
  • Application: Induction Furnace, Electric are furnace, Metallurgy equipment, Resistors, Electric motor, Appliances and wherever insulation of high temperature and high dielectric strength is required

Brazing Rods

Brazing Rods
Approx. Rs 2,000 / Kilogram(s)
Brazing rods are used to braze the copper, brass parts. There are several types of brazing rods available in market. Silver brazing rods contains silver percentage in various ratio. As silver percentage rises the price of rod rises. Copper brazing rods are available to braze copper to copper . Brass brazing rods are used for brazing of brass parts


  • length  varies from 15 inch to 1 meter
  • thickness – available in 1. 6mm, & 3mm

Flexible Mica Glass Ceramic Sheet

Flexible Mica Glass Ceramic Sheet
Approx. Rs 8,000 / Roll(s)


Flexible Mica Glass Ceramic Sheet Is A Flexible Folium made by combining Phlogopite mica paper, glass cloth, and ceramic paper bonded with silicon resin. It has excellent flexibility, heat resistance, moisture resistance and other electrical properties. It does not emit smoke or odour. It can be use at temperatures up to 1200 o c depending on the application.


This is suitable for High Temperature Resistant gasket , Induction Furnace & Refractory Linings. These are some of the typical high thermal & electrical insulation application.


SIZE : (STANDARD) --  1000 MM WIDTH  X (10 – 40 ) MTRS LONG

THINKESS :     2.0 MM TO 4.00 MM


Sheet are packed in airtight mechanically strong wooden boxes so that these are produced from dirt dust and moisture. The packing also ensures safe transit and storage.


Ceramic Paper

Glass Cloth

Phlogopite Mica

Silicone Resin


Tensile strength           N/ cm                 > 200

compression                 %                     > 40


Dielectric strength               :KV/MM:       > 20

Heat coductivity                  :W / M.K:      0.2 (AT ROOM TEMPERATURE)

Tracking resistance             :      CLASS: KA3C

All information give hear is based on test performed in well – equipped laboratory of ruby mica co. However the user shall carry out further test successful application as per use.

Roofing Sheets

Roofing Sheets
Approx. Rs 500 / Square Meter(s)
We deal in Various type of Roofing sheets
Ac Profile , GI profile ,Plain in various Thickness

Fiberglass Woven Tape

Fiberglass Woven Tape
Approx. Rs 500 / Roll(s)
Unvarnished Fiberglass tapes also known as F.G.Woven Tape  are made from finest Fiber Glass yarn which has good Thermal & electrical insulation and also mechanical strength

  • Type: Unvarnished tapes has temp rating 600° C
  • Available: 15 mtr roll in 2” & 2 ½” width in 3 mm thickness
  • Application: Induction Furnace coil insulation

Asbestos Tape

Asbestos Tape
Approx. Rs 250 / Kilogram(s)
Asbestos Tape - Belt. Asbestos Webbing Tape Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater.

  • Metallic and Non-Metallic.
  • Width: 12.5mm to 100mm
  • Thickness: 1.5mm, 3mm & 6mm
  • Suitable for temperature UPTO 350`C

Silicon Rubber Tapes

Silicon Rubber Tapes
Approx. Rs 250 / Roll(s)
Silicon rubber tape (belts) has properties of  high temperature resistance, chemical resistance, abrasion resistance, superior dielectric & non sticky properties


  • Various thickness from 0. 5 mm to 5 mm
  • width : as per request, standard size available with us 2” width, 0. 5 mm thick
  • standard roll size- 15 mtr
  • application: insulation of induction coil as an overwrap for protection of terminating high-voltage cables against arcing and tracking.

Fiber Glass Tape

Fiber Glass Tape
Approx. Rs 1,250 / Roll(s)
Description :  fiber glass tapes are made up of fiber glass rovings. It is used for electrical insulation purpose.

  • type: non adhesive tapes & adhesive tapes
  • availability: non adhesive, unvarnished tapes are available in various sizes
  • standard size are 1” width, 2” width  with 5mil, 7 mil & 10 mil thickness
  • standard length standard roll length is 30 meter & 50 meter.
  • application: used in induction furnaces for coil insulation,, also used to insulate naked live copper & aluminium busbars, wires, silicon rubber tape

FRP Epoxy Sheet

FRP Epoxy Sheet
We Star Enterprises are one of the reputed manufacturer and supplier of FRP Epoxy sheets.


Star Enterprises, Mumbai
Ashish Shah (Partner)
Office No. 18, 1st Floor, Diamond Building, Pathakwadi Lane, Lohar Chawl
Mumbai - 400002, Maharashtra, India

Home  |   About Us   |  Products   |   Site Map  |   Contact Us   |   Mobile Site

© Star Enterprises, Mumbai. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited